We are a factory that specializes in the production of 25kV 250A Load break Elbow Connectors. Our high-quality products ensure reliable connections for your electrical needs. #SEO #Factory #Electrical #Connectors #Reliable
Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector.
Features:
l Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.l Built-in capacitive test point to determine the circuit status or install a fault indicator.l No minimum phase clearance requirements.l Mounting can be vertical, horizontal, or any angle in between.
Application:
l For connection of polymeric cable to transformers, switchgear, motors and other equipment with a pre-molded separable connector.l For indoor and outdoor installations.l System voltage up to 24 kV.l Continuous current 250 A (300 A overload for 8 hours).l Cable particulars:-Polymeric cable (XLPE, EPR, etc.)- Copper or aluminum conductors-Semiconducting or metallic screens- Conductor size 25-120 mm²
Parameters：
Ratings Overview：（Um) Maximum system voltage：25kVImpulse withstand voltage：125kVAC withstand voltage ,5min：54kVContinuous operating current：250AOverload (8 hrs. Max.) ：300AShort circuit withstand：12.5kA/1sREMARK: All the data based on the standards IEC, Not the limited.Product Structure1、Conducting Rod: Tin-plated copper pin screws into the conductor contact with the supplied hex key.2、SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.3、Insulation: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality.4、Pulling Eye: Encapsulated stainless steel pulling eye with a decent to position the bail.5、Capacitive Test Point: Capacitive test point provides means to check circuit status. Molded EPDM conducting rubber cap provides a watertight seal.6、Stress Relief: The configuration of the outer shielded and the cable adapter provide cable stress relief.7、Cable Adapter: The sized opening provides and interface fit to maintain a watertight seal.8、Grounding Eye: Molded into the external screen for connection of an earth wire.9、SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential.10、Conductor Cable lug: Inertia welded bimetallic compression connector accepts copper or aluminum conductors.
Product Structure 1、Conducting Rod: Tin-plated copper pin screws into the conductor contact with the supplied hex key. 2、SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress. 3、Insulation: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality. 4、Pulling Eye: Encapsulated stainless steel pulling eye with a decent to position the bail. 5、Capacitive Test Point: Capacitive test point provides means to check circuit status. Molded EPDM conducting rubber cap provides a watertight seal. 6、Stress Relief: The configuration of the outer shielded and the cable adapter provide cable stress relief. 7、Cable Adapter: The sized opening provides and interface fit to maintain a watertight seal. 8、Grounding Eye: Molded into the external screen for connection of an earth wire. 9、SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential. 10、Conductor Cable lug: Inertia welded bimetallic compression connector accepts copper or aluminum conductors. 
