25kv 630A Two-Position Oil Immersed Loadbreak Switch

We are a reliable factory offering the 25kv 630A Two-Position Oil Immersed Loadbreak Switch. Our product ensures efficient and safe switching operations. Order now! #oilimmersedswitch #loadbreakswitch #factorydirect #switchingefficiency

Request a Quote
  • 25kv 630A Two-Position Oil Immersed Loadbreak Switch
  • 25kv 630A Two-Position Oil Immersed Loadbreak Switch
  • 25kv 630A Two-Position Oil Immersed Loadbreak Switch

PRODUCTS DETAILS

Product Description

25kV 630A Type Two-Position Oil Immersed Load Switch

With the transformer oil as insulation and arc extinction medium and energy storing spring operating mechanism, this two-position oil immersed load switch applies to the combined transformer with 50Hz frequency and 25kV rated voltage, it is capable to turn on and off the load current. Equipped with ON and OFF two positions, the clockwise turn is "ON", while anticlockwise is "OFF", the rotation angle should be controlled within 90°. In addition, it can be suitable for end power distribution system or ring-network power distribution system if equipped extra configurations. Main technical parameters 25kv 630A Two-Position Oil Immersed Loadbreak Switch
Overall dimension  25kv 630A Two-Position Oil Immersed Loadbreak Switch Reservation installation size for transformer housing  25kv 630A Two-Position Oil Immersed Loadbreak Switch Load switch installation Before installation, please check whether the switching motion is flexible and accurate carefully, only after confirmed to be under good condition, the installation can be implemented, in addition, the load switch must be dried under 65±5ºCcondition by 24h. 25kv 630A Two-Position Oil Immersed Loadbreak Switch25kv 630A Two-Position Oil Immersed Loadbreak Switch25kv 630A Two-Position Oil Immersed Loadbreak Switch 5) After installation and connection, it is suggested to carry out "open" and "close" operation to check if the switch can be moved flexibly and if the position indication is correct, if any abnormal, please check the installation of switch and the connection of busbar according to article 2 and 4. Points for attention   1) This load switch can be used to open or close rated current only, while the application for closing and opening the failure current. If over rated current, forbidden to operate switch. 2) Only the special insulated operating arm can be used to operate this load switch to ensure personal safety.   Connection Diagram  25kv 630A Two-Position Oil Immersed Loadbreak Switch

Hot Products

Deadbreak Type Junction

Deadbreak Type Junction

15Kv25Kv Bushing Extender

15Kv25Kv Bushing Extender

Contact Box Ah3-12kv 190 1600A

Contact Box Ah3-12kv 190 1600A

LZZBW-35B(GY)Epoxy Resin Casting Type Current Transformer

LZZBW-35B(GY)Epoxy Resin Casting Type Current Transformer

25kV 250A Load break Elbow Connector

25kV 250A Load break Elbow Connector

25kV 250A extended Apparatus Bushing with skirt

25kV 250A extended Apparatus Bushing with skirt

200A Load Break Junctions

200A Load Break Junctions

HV Dropout Fuse Cutout AH-10

HV Dropout Fuse Cutout AH-10

25kV 400A Extended Apparatus Bushing

25kV 400A Extended Apparatus Bushing

 Lzzbj9-12/175b/4 Epoxy Resin Casting Type Current Transformer

Lzzbj9-12/175b/4 Epoxy Resin Casting Type Current Transformer

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours