Heat shrinkable power cable middle connector

As a leading factory, we offer high-quality heat shrinkable power cable middle connectors. Our products are manufactured using advanced technology and meet international standards. Enjoy unmatched durability and efficiency. Order now! #heatshrinkableconnector #cablemiddleconnector #factorydirectprices

Request a Quote
  • Heat shrinkable power cable middle connector
  • Heat shrinkable power cable middle connector
  • Heat shrinkable power cable middle connector
  • Heat shrinkable power cable middle connector
  • Heat shrinkable power cable middle connector

PRODUCTS DETAILS

Summary:

A wide range of glass fiber reinforced plastic shell products. mainly 10kV single core 10kV three core, 35kV single core 35kV three core,110kV, 220kV, 500kV single core intermediate joint glass steel shell a few categories. The main function of the glass fiber reinforced plastic shell is to withstand the impact of a certain external force and damage to the middle joint.

Installation method:

1 preparations 1.1 Check the glass fiber reinforced plastic shell for the specifications and dimensions and the outer diameter of the cable and the middle head (stress cone or copper shell) with the size of the match; 1.2 Check the sealing material of the FRP shell (the sealing gasket of the opening of the HAF, the sealing material of the FRP shell and the cable and the heat-shrink tube) are complete; 1.3 Check the high-voltage cable epoxy mud two-component cable plastic packaging is complete, the number of components 1s sufficient; 2. Fiberglass housing assembly,For the installation of the FRP shell of the middle section of the cleaning process, install the upper and lower half of the fiberglass shell, leads to coaxial cable or grounding cable, tighten a number of bolts, explosion-proof box two-port and coaxial cable or grounding cable sealing treatment Waterproof sealing tape and shrink shrink tube}; 3. Add talc to the epoxy mud, and then the two components of the high-voltage cable epoxy mud together to stir evenlγ; 4FiII the two ends of glass fiber reinforced plastic shell with epoxy mud; epoxy mud filled to the shell a little oblique part, and then wrapped around the waterproof belt. The two ports wrapped tightly. 5.Seal the cover,the installation is complete. Suitable for 0.6/1 KV polyvinyl chloride, crosslinked polyethylene, rubber insulated single core,two core, three core. four core. five 10kV Heat shrinkable power cable terminal core power cable.

Hot Products

Ahtg3-12kv 140X200 Epoxy Resin Wall Bushing

Ahtg3-12kv 140X200 Epoxy Resin Wall Bushing

Bushing Well

Bushing Well

3kV polymer lightning arrester

3kV polymer lightning arrester

600A Loadbreak Reducing Tap Plug

600A Loadbreak Reducing Tap Plug

SMRS Fuse wire

SMRS Fuse wire

Tap Changer Oil Immersed Load Break Switch (WSLII3-125-35)

Tap Changer Oil Immersed Load Break Switch (WSLII3-125-35)

Oil-immersed four-position loadbreak switch

Oil-immersed four-position loadbreak switch

25kV 400A Extended Apparatus Bushing

25kV 400A Extended Apparatus Bushing

12kV24kV 630A Dead break Type H Junction

12kV24kV 630A Dead break Type H Junction

Transformer Bushing for High Voltage Low Voltage Bushing

Transformer Bushing for High Voltage Low Voltage Bushing

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours